If you need a new shingle roof in Capulin, here's what matters: fiberglass mat construction with ceramic granulated coating for UV protection and fire rating. Architectural shingles carry a Class A fire rating and wind resistance ratings up to 130 mph. Capulin Roofing & Maintenance helps you pick the right shingle for your home and budget.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Consultation & Inspection
We inspect your existing roof deck and sheathing, measure the area, and help you choose between architectural and three-tab asphalt shingles. Color samples brought to your Capulin home.
Strip & Inspect
Full tear-off to the deck. Old shingles, deteriorated felt, and corroded flashing removed and hauled to the dumpster. Deck inspection catches hidden damage — rotted sheathing, water-stained OSB, nail pops — before it's buried under new shingles.
Ice Shield & Drip Edge
Synthetic underlayment across the full roof deck. Ice-and-water shield in valleys, along eaves, and around chimney flashing, pipe boots, and vent boots. New drip edge installed at every eave and rake. Step flashing and counter-flashing at all wall transitions.
Nailing & Overlap
Asphalt shingles laid from eave to ridge with precise offset between courses. Every shingle fastened in the manufacturer's nailing zone — too high or too low voids the warranty. Ridge cap and hip shingles complete the system with ridge vents for balanced attic ventilation.
What Capulin Customers Say
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
Why Choose Capulin Roofing & Maintenance for Shingle Roofing?
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.